The characteristics of the horizontal injection molding machine
PRODUCT DESCRIPTION
The characteristics of the horizontal injection molding machine:
1. Because of the low height of machine’s body, there is no height restriction on the plant to be installed.
2. When the product can be automatically dropped, automatic molding can be realized without using a robot.
3. Due to the low fuselage, convenient feeding, easy maintenance.
4. The mold needs to be installed by crane.
5. multiple units can be arranged side by side, products are easy to be collected and packaged by conveyor belt.
| Model No. | 950A | 3000A | 5500A | 10000A | |
| INJECTION UNIT | |||||
| SCREW DIAMETER | mm | 35 | 65 | 80 | 100 |
| SCREW L/D RATIO | L/D | 21 | 21 | 22.3 | 24.2 |
| THEORETICAL SHOT VOLUME | cm3 | 154 | 995 | 2141 | 4083 |
| SHOT WEIGHT（PS） | g | 140 | 905 | 1948 | 3715 |
| INJECTION PRESSURE | Mpa | 183 | 176 | 188 | 206 |
| THEORETICAL INJECTION RATE（PS） | g/s | 91.8 | 283 | 427 | 695 |
| PLASTICISING CAPACITY | g/s | 12.5 | 43.3 | 80 | 96 |
| SCREW TORQUE | N.m | 510 | 2530 | 5170 | 8690 |
| MAX.SCREW ROTATE SPEED | r/min | 260 | 150 | 150 | 110 |
| INJECTION STROKE | mm | 160 | 300 | 425 | 520 |
| CLAMPING UNIT | |||||
| MAX.CLAMPING FORCE | KN | 950 | 3000 | 5500 | 10000 |
| MAX.OPENING STR0KE | mm | 340 | 590 | 820 | 1160 |
| SPACE BETWEEN TIE BARS | mm | 360×360 | 610×610 | 810×810 | 1110×1110 |
| MOULD HEIGHT | mm | 135-380 | 220-630 | 350-820 | 450-1200 |
| MAX.DAYLIGH | mm | 720 | 1220 | 1640 | 2360 |
| EJECTOR FORCE | KN | 25.4 | 70.6 | 150 | 245 |
| EJECTOR STROKE | mm | 85 | 150 | 210 | 350 |
| EJECTOR QUANTITY | 5 | 9 | 13 | 21 | |
| OTHER | |||||
| PUMP MOTOR POWER | KW | 11 | 30 | 55 | 90 |
| PUMP PRESSURE | Mpa | 16 | 16 | 16 | 16 |
| HEATING POWER | KW | 7.3 | 22 | 33 | 68.45 |
| HEATING ZONE | 4 | 5 | 6 | 6 | |
| SIZE | m | 4.25×1.2×1.8 | 6.7×1.75×2.25 | 8.4×2.2×2.6 | 12.38×2.8×3.5 |
| NET WEIGHT | ton | 3.2 | 11 | 23.5 | 60 |
| OIL TANK CAPACITY | L | 260 | 560 | 1000 | 1700 |
